EOS 38.AS Guia de Instalação descarregar pdf (Página 4)

Installation of the 38 AS wall-mounted

heater

Minimum distances

1. Fasten the wall mounting bracket to the cabin

wall as shown in Figs. 3 + 4, centered above

the fresh-air inlet, using the enclosed tension

plate screws.

2. Connect the power cable as shown in the

circuit diagram. A circuit diagram is provided

on the inside of the terminal box cover.

3. Close the terminal box with the cover, spacer

toward the outside, using 2 sheet metal

screws.

4. Mount the sauna heating unit to the wall

mounting bracket by the mounting slots and

insert the spacer (Fig. 7).

Power input in

Suitable for cabin

size

in m3

Minimum diameters in mm2 (copper lead) for connection to 380-

400 V AC 3N

Heater connection cable

from control unit to heater

Power line from

power grid

to control unit

Fuses (in A)

4,5 ca. 4 - 6 5 x 2,5 5 x 1,5 3 x 16

6,0 ca. 6 - 10 5 x 2,5 5 x 1,5 3 x 16

7,5 ca. 8 - 12 5 x 2,5 5 x 1,5 3 x 16

9,0 ca. 10 - 14 5 x 2,5 5 x 1,5 3 x 16

12,0 ca. 14 - 18 5 x 4 5 x 1,5 (2 Stück) 3 x 25

Table 2

Cabin wall

42 cm

Heater

safety grate

8 cm

36,0 cm

8 cm

Fig. 2

8 cm

Fig. 3

Fresh-air inlet

65 cm

59,5 cm

Wall mounting

bracket

Wall mounting

bracket

. 10

34 cm

65 cm

Fresh-air inlet

Fig. 4

1 2 3 4 5 6 7 8 9

Comentários a estes Manuais

Sem comentários

EOS 38.AS Guia de Instalação Página 4

Comentários a estes Manuais